JVC PU30425 Set Counter Display, Reset Counter, Engage Itr Mode, Set Recording Duration

6

q

RECORD

DISPLAY

2

1 2 3

4 5 6

7 8 9

0

C.RESET

3

1

25

Elapsed Recording Time

Indication

You can check the exact time of a recording.

1	SET COUNTER DISPLAY
	Press DISPLAY until a counter reading appears on the
	dispay panel.
2	RESET COUNTER
	Press C. RESET before starting recording or playback.
	● The counter is reset to “0:00:00” and shows the exact
	elapsed time as the tape runs.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. ITR blinks and 0:30 appears on the front display panel.

SET RECORDING

DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.