JVC PU30425 specifications Select NEW Station, Switch Stations, Select Station Name Character

6

q

CH SET

2

1 2 3

4 5 6

7 8 9

0

3 OK

1

PUSH JOG

43

Perform steps 1 and 2 on page 41 to access the Confirmation screen before continuing.

Set Stations (A)

1	SELECT ITEM
	Press PUSH JOG%Þ%%until the item you want begins
	blinking. Then press OK twice and the station’s name
	(ID) begins blinking.

2	SELECT NEW STATION
	Press PUSH JOG%Þ until the new station’s name (ID)
	you want to store begins blinking.
	Registered station names (☞ pg. 45) appear as you
	press PUSH JOG%Þ.

3	SWITCH STATIONS
	Press OK.
	● Repeat steps 1 through 3 as necessary.
	CLOSE CONFIRMATION
4	SCREEN
	Press CH SET.

Set Stations (B)

NOTE:

First perform step 1 of the above procedure.

SELECT STATION NAME

CHARACTER

	Press PUSH JOG %and the first letter of the station
2 name begins blinking.
	ENTER NEW CHARACTER
	Press PUSH JOG%Þ to cycle through the characters
	(A–Z, 0–9, –, , +, (space) ) and stop when the
3 desired one is*indicated,[		then press PUSH JOG%to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.

●Repeat steps 1 through 3 as necessary.

● If you make a mistake, press PUSH JOG % until the incorrect character begins blinking. Then enter the correct character by pressing PUSH JOG%Þ.

CLOSE CONFIRMATION

SCREEN

4 Press CH SET.