JVC PU30425 Random As- semble Editing, Prepare For Editing, Access R.A. Edit Func, Tion, Huttle

36

EDITING(cont.)

Random As- semble Editing

PAUSE/

R.A. EDIT

Player Your VCR

6

q

Audio signal Video signal

Another VCR

(w/PAUSE conector)

Recorder

REMOTE	Mini-plug Cable
	(Not provided)
PAUSE

HUTTLE

6

JOG q

CANCEL	0	STOP	PLAY
		PLAY
	STOP	IN/OUT

This function makes it easier to create edited videos when your video recorder is used as the source player in combination with another video recorder equipped with a Remote PAUSE Connector. You can pre-program up to 8 scenes or “cuts” for automatic editing in the sequence you have specified.

MAKE CONNECTIONS

1 Connect your recorder’s VIDEO OUT and AUDIO OUT connectors to the VIDEO IN and AUDIO IN connectors on the recording deck, and connect your recorder’s PAUSE/R.A. EDIT connector to the PAUSE connector on the recording deck.

●If the recording deck doesn’t have a PAUSE connec- tor, connect to the R.A. EDIT connector instead.

●The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

	PREPARE FOR EDITING
	Insert the cassette to be recorded on into the recorder
2 and set the recorder's input mode.
	LOAD SOURCE CASSETTE
3 Insert the source cassette into your recorder.
	START SOURCE PLAYBACK
4 Press PLAY.
	ACCESS R.A. EDIT FUNC-
5	TION
	Press R.A. EDIT.
	● The screen is superimposed on the video playback in
	step 6.
	LOCATE EDIT-IN POINT
	Find the point on the source			R.A. EDIT		EDIT MODE
	tape from where you want		=1		0:00:00
6 the edited scene to begin by				2
		3
	pressing PUSH JOGÞ%or	4
	using the SHUTTLE ring or	5
	the JOG dial, then press	6
	IN/OUT on the remote	7
		8
	control.			TTL 0:00:00		CNT 0:00:00

●The edit-in point is

registered in memory and appears on the screen.

●You can also perform an Index Search (if index marks have been previously recorded on the tape at the desired points) to find the points you want, but this

will result in reduced accuracy.

3

	1
	.EDIT
A
.
R

START

PUSH JOG