JVC PU30425 Revise Programme In- Formation, TIMERRECORDINGcont, Check And Cancel Programmes

32

TIMERRECORDING(cont.)

Check And Cancel Programmes

6

q

2

1 2 3

4 5 6

7 8 9

1

ACCESS PROGRAMME SCREEN

Press PROG CHECK. Each time you press the next program’s information appears.

●Press OK and watch the front display panel as the Start and Stop times, the Date and the Preset appear.

●If the recorder is turned on and the TV is set to its VIDEO mode, you can check program information on screen as well.

If All Information Is Correct . . .

. . . programming is completed.

If You Wish To Revise Data . . .

. . . with the recorder's power turned on, go to step 2.

If You Wish To Cancel A Program . . .

. . . with the recorder's power turned on, press CANCEL. All information you input is deleted.

REVISE PROGRAMME IN- FORMATION

CANCEL

START+/–

0

TV PROG.

2

Input the appropriate data using the START +/–, STOP

+/–, DATE +/– and TV PROG. +/– buttons on the

remote control.

STOP+/–

3

1

DATE+/

–

.CHECK PROG

OK

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING TO START SOON

[CANCEL]

NOTES:

●The warning only appears if you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press CANCEL.