JVC PU30425 Adjust Tracking Manually, Return To Automatic Tracking, Activate Instant Review

14

PLAYBACK (cont.)

Manual Tracking

6

q

TV PROG. REVIEW

REVIEW

2

1 2 3

4 5 6

7 8 9

0

TV PROG.

SP/LP

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.

OVERRIDE AUTOMATIC TRACKING

1 Press SP/LP on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

2 Press TV PROG. + or – to adjust tracking.

RETURN TO AUTOMATIC TRACKING

3 Press SP/LP on the remote to re-engage automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

3

1

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REV 3” appears and blinks. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number displayed on the front display panel may not match the actual number of timer-recorded programmes when one or more of them is a PDC recording (☞ pg. 33).