JVC PU30425 Video Plus+ Timer Recording, Enter Pluscode Number, 28TIMERRECORDINGcont, Press PROG

28TIMERRECORDING(cont.)

Video Plus+

Timer

Recording

Before performing Video Plus+ Timer Recording, be sure to read "Information on Video Plus+" on page 26.

6

q

		2
2	1	2	3
	4	5	6
NUMBER
	7	8	9
CANCEL		0

1	1	3	OK 3
	PROG.

ILLUMI GUIDE

During Video Plus+ and regular timer programming, the Illumi- Guide feature tells you which button on the remote control must be pressed next by lighting it up. To use this feature, press ILLUMI GUIDE before performing step 1. (PROG, REW, PLAY,

FFlight up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to step 1.

ACCESS TIMER PROGRAM- MING SCREEN

1	Press PROG.
	TIMER PROGRAMMING
	[0 – 9] : VIDEO PLUS+
	[+/-] : EXPRESS PROGRAMING
	[CANCEL] : EXIT

The front display panel looks like this:

●If you are using the Illumi-Guide feature, the following buttons will light up: NUMBER keys (0–9), START +/–, STOP +/–, DATE +/–, TV PROG +/–, and

CANCEL.

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	V I D E O	P L U S +
enter the PlusCode
	1 2 3 4 5	6 7 8 5
2 number of a programme
you wish to record.

●If you make a mistake,

press CANCEL and then	[0 – 9] : INPUT
	: OK
input the correct
number.

The PlusCode number you enter appears on the front display panel:

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0– 9) and CANCEL.

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press CANCEL and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the video recorder, press CANCEL and re-perform the timer programming procedure from the beginning.