JVC PU30425 Basic Connections, Check Contents, Situate Recorder, Connect Recorder To Mains

4

INSTALLINGYOURNEWRECORDER

Basic Connections

Aerial terminal

21-pin SCART connector

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

1	CHECK CONTENTS
	Make sure the package contains all of the accessories
	listed in “Specifications” (☞ pg. 55).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type of
	TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and the
	TV’s aerial terminal.
	Before operating the recorder, make sure the TV’s preset
	is set to the VIDEO preset.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect the provided SCART cable between the AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

c– Set the RF OUT switch to OFF.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

Back of TV

RF Cable (provided)

21-pin SCART Cable (provided)

Mains Power

Cord

Mains outlet

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.