JVC PU30425 Turn the Recorder on, SET Clock Automatically, Preparation, Auto Clock Set

JUST CLOCK: ON

TV. PR 1

9

Clock Set

1 OPERATE

		2
	1	2	3
	CLOCK	5	6
2,4	4
	7	8	9
		0

3

1

6

q

OPERATE 1

OK

PUSH JOG 3

If you performed Auto Channel Set (☞ pg. 8), the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 3 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Tuner Set was performed.

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Clock Set and Auto Clock Set screens, and can be set “ON” or “OFF” (the default setting is “ON”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%Þto change the setting.

IMPORTANT: If you turn off Just Clock off, the accuracy of your recorder’s built-in clock may be reduced, which could adversely effect timer recording.

Both Auto and Manual clock setting procedures begin from step 3.

Preparation

TURN THE RECORDER ON

1 Press OPERATE.
	ACCESS CLOCK SET
2	SCREEN
	Press CLOCK on the		CLOCK SET
	remote control. The Clock	TIME		DATE	YEAR
	Set screen appears.
			0: 00	01 . 01	00
			JUST	CLOCK: ON
			TV. PR		1
		[5	]: AUTO CLOCK SET
		[5°]:ADJUST =			:OK
		[CLOCK] : EXIT

Auto Clock Set

SET CLOCK

AUTOMATICALLY

	At the Clock Set screen,	CLOCK SET
	press PUSH JOG%. The
		AUTO CLOCK SET
3 Auto Clock Set screen
	appears and clock setting	PLEASE WAIT
	begins.

● If "TV.PR" isn't set to the preset position on which Auto Clock Set data is received, "ERROR"

appears, and then the screen from step 2 reappears. To set "TV.PR", press OK to place the cursor next to it, then cycle through the numbers by pressing PUSH JOG%Þuntil the number representing the position in which the station transmitting clock setting data (BBC1, BBC2, etc.) is stored appears.

CONTINUED ON NEXT PAGE.