JVC PU30425 Engage Recorder’S, Timer Mode, Access Video Plus+, Program Screen, Set Tape Speed

6

TIMER

6

q

4	SP/LP
		ADD TIME
		2
:	1	2	3
PDC	4	5	DAILY
			6
	7	8	9	WEEKLY
					6
3 CANCEL		0		TIMER

4 SP/LP

1 3 OK 3

Satellite Receiver Users

To timer-record a satellite broadcast using Video Plus+, perform steps 1 – 6 and, before the selected programme begins, select the appropriate channel on the satellite receiver. Then set the receiver's timer. If your satellite receiver doesn't have a timer, leave the unit's power switched on.

29

	ACCESS VIDEO PLUS+
	PROGRAM SCREEN
	Press OK, and the Video	PROGRAM 1
	Plus+ Program screen	VIDEO PLUS+ 12345678
3 appears (if you’re just		START	STOP
		21 : 00 =	22		: 00
	starting out, “Program 1”	SP			ON
	appears).
		DATE	TV		PROG
	● If the number you	25. 12			1
	entered is invalid,	:OK		BBC1
	“ERROR” appears. Press
	CANCEL and input a valid PlusCode number.

The front display panel looks like this:

		SP
	● If you are using the Illumi-Guide feature, OK blinks.
4	SET TAPE SPEED
	Press SP/LP to set the tape speed.
	IMPORTANT
	If you’re not receiving PDC (Programme
	Delivery Control), press		: PDC (NUMBER key
	“7”) to set to "OFF" (☞ pg. 33).
	RETURN TO NORMAL
5	SCREEN
	Press OK.
	● Repeat steps 1 – 5 for each additional programme.
	ENGAGE RECORDER’S
	TIMER MODE
6 Press TIMER.

NOTE:

For safety, your recorder disables all other functions while in the Timer mode. If you want to use the recorder but its Timer mode is engaged, press TIMER and all other functions are operable.

To re-engage the timer, press TIMER.

To Delay The Stop Time . . .

. . . press ADD TIME after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday).

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 32).