JVC PU30425 Regular Timer Programming, Access Programme, Start Time, 30TIMERRECORDINGcont, Screen

30TIMERRECORDING(cont.)

Regular Timer Programming

Remember, the clock must be set before you can progamme the timer (☞ pg. 9).

6

q

	2
1	2	3
4	5	6
7	8	9
CANCEL	0

START+/–

2,3

1		3
	PROG.	1

ILLUMI GUIDE

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press CANCEL and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the video recorder, press CANCEL and re-perform the timer programming procedure from the beginning.

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

Or you can use the Illumi-Guide feature, where the remote control tells you which button to press next by lighting it up. To use the Illumi-Guide feature, press ILLUMI GUIDE before performing step 1. (PROG, REW, PLAY, FF light up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to step 1.

ACCESS TIMER PROGRAM- MING SCREEN

1	Press PROG.
	● If you are using the Illumi-Guide feature, the following
	buttons will light up: NUMBER keys (0–9), START +/–,
	STOP +/–,DATE +/–,TV PROG +/–, and CANCEL.
	ACCESS PROGRAMME
2	SCREEN
	Press START +/–. (If you’re	PROGRAM 1
	just starting out, “Program
		START	STOP
	1” appears.)
		– : – –	– : – –
		SP		ON
		DATE	TV PROG
		25. 12		– –
		[+ –] : SET =	: OK

The front display panel looks like this:

SP

●If you are using the Illumi-Guide feature, the following buttons will light up: START +/–, STOP +/–, DATE +/–, and TV PROG +/–.

	ENTER PROGRAMME
	START TIME
	Press START +/– to enter	PROGRAM 1
	the time you want
3 recording to start.		START	STOP
		21 : 00	– : – –
	● Press and hold START	SP		ON
	+/– to move in 30-	DATE	TV PROG
	minute increments, or	25. 12		– –
	press and release	[+ –] : SET =	: OK
	repeatedly to move 1
	minute at a time.

The front display panel looks like this:

SP

●If you are using the Illumi-Guide feature, the following buttons remain lit: START +/–, STOP +/–, DATE +/–, and TV PROG +/–.