JVC PU30425 Basic Recording, Choose A Programme, Set Tape Speed, Start Recording, Pause/Resume

20

Basic

Recording

5	PAUSE	TV PROG.
	6
	q

PROG.TV	SP/LP	4	RECORD
			STOP/EJECT	PLAY 5
	3
	2		6

		2
	1	2	3
2 NUMBER	4	5	6
	7	8	9
		0

			TV PROG.	2
3	SP/LP		PLAY 4,5
4 RECORD			PAUSE	5
		STOP	3
		1
	6

RECORDING

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
		Insert a cassette with the record safety tab intact.
		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.
2		CHOOSE A PROGRAMME
		Press TV PROG. +/– or the NUMBER keys to select the
		preset you wish to record. The name of the station
		appears in the recorder’s display panel for 5 seconds,
		followed by the preset position number. (Only stations
		that appear in the Confirmation screen will be displayed.)
		● The TV PROG. dial can also be used to select a preset.
3		SET TAPE SPEED
		Press SP/LP. Check the SP/LP indicator on the recorder
		display panel to confirm the selected tape speed.
		● Picture quality of LP recordings will not be as high as
		SP recordings.
4		START RECORDING
		Press and hold RECORD and PLAY on the remote
	control, or press RECORD on the recorder.
		B.E.S.T. takes place at the beginning of both the
		first SP and the first LP recording after inserting the
		cassette (☞ pg. 21).
		PAUSE/RESUME
5		RECORDING
		Press PAUSE. Press PLAY to resume recording.
6		STOP RECORDING
		Press STOP on the remote control or STOP/EJECT on
		the recorder. Then press STOP/EJECT to remove the
		cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab