5 – Channel modules : Surround operations
Pan mode off When pan mode is off, the screen is much simpler. No pan controls are available, and the only controls which may be set are the surround
matrix selection and the individual speaker selection
Figure 5.34: Surround screen (pan mode off)
LFE level
The amount of signal sent by each channel to the LFE output can be set in the LFE LEVEL screen:
Figure 5.35: LFE level
Select the channel or use the cursor to move the box cursor around the screen, and the POD encoders to adjust the LFE level.
NOTE
If a channel is not assigned to the LFE, adjusting the level here will have no effect.
At the bottom of the screen, you can use the POD 1 encoder to select surround matrix 1 or 2.
POD 3 encoder allows a batch LFE level to be set, and POD 4 sets the scope of the level setting (ALL, ODD, EVEN, or groups of eight channels) for the cur- rently selected surround matrix.
Use ENTER to make the batch setting.
78 TASCAM