Tascam 9 – Specifications : Messages and troubleshooting, TASCAM DM-3200Owner’s Manual

9 – Specifications : Messages and troubleshooting

Action	Message	Meaning
✔	Copy from Ch2 Automation configuration	Confirmation when copying automation configuration.
✔	Copy OK?	Confirmation when performing a parameter copy operation.
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Copy to xxxx fader level	Confirmation when copying fader levels. xxxx may be ALL, ALL MASTER, Aux 1-
	Press ENTER to confirm,	8, groups of 8 busses, or groups of 8 channels.
	or a cursor key to cancel
●	Copy was completed.	Popup message on completion of copy operation.
✔	Create project?	Confirming creation of a project.
	Press ENTER to confirm,
	or a cursor key to cancel.
●	Creating project.	Warning not to remove CF card during project completion.
	Do not remove the CF card.
✖	Current Data Initialized.	Notice to restart the DM-3200 following a change of reinitialization and
	Fs has changed.	sampling frequency
	Mixer will reboot.
	Press ENTER to confirm,
	or a cursor key to cancel.
✖	Current Data initialized.	Notice to restart the DM-3200 following a change of sampling frequency.
	Fs has changed.
	Mixer will reboot.
	Press ENTER to confirm
	or a cursor key to cancel.
●	Data change was applied.	Date and time have been changed.
●	Data has not been changed.	Date and time have not been changed
✖	Device is not active.	A device selected for transport control is not active.
✖	Digital In1: Error	The DIGITAL IN audio source is not providing digital audio data.
	Not audio signal
	Press ENTER to continue.
✖	Digital In1: Error	The DIGITAL IN clock source is not providing digital audio data, and the sync
	Not audio signal	clock is now unlocked.
	Source Fs unlocked
	Press ENTER to continue.
✖	Digital In1: Error	The DIGITAL IN clock source has experienced an error, and the sync clock is now
	Source Fs unlocked	unlocked.
	Press ENTER to continue.
✖	Digital INPUT1 : Fs convert On	It is not possible to use a source as a word clock when sampling frequency
	Can’t select master clock.	conversion is turned on.
	Press ENTER to continue.
✔	DIGITAL TRIM	Confirmation that the digital trim values are to be updated.
	Update setup?
	Press ENTER to confirm,
	or a cursor key to cancel
✖	Effect	An attempt has been made to store to a protected library entry (effect).
	Preset a-bbb is Read-only!
●	Effect Bank a-bbb recalled	A library entry has been recalled (effect).
	To Effectx
		Table 9.2: Popup messages

TASCAM DM-3200 Owner’s Manual 109