Juniper Networks J2350 manual Configuring Basic Settings with a Configuration Editor

JUNOS Software with Enhanced Services Hardware Guide

Table 43: Basic Configuration Wizard Summary (continued)

Prompt

Would you like to create a new user account? [yes, no] (no):

If you enter y(es), the configuration wizard displays the following prompt:

Enter a new user name:

After you enter a username, the configuration wizard prompts you for an associated password.

Enter user password

After you enter the password, the configuration wizard requests that you verify it.

Retype the password:

SNMP

Would you like to configure SNMP Network Management? [yes,no] (no):

If you enter y(es), the configuration wizard presents the following prompt:

Enter community string [public]:

Function

Defines a new (non-root) user account.

Configures the Simple Network Management Protocol parameters. The SNMP community string defines the relationship between an SNMP server system and the client systems. The string serves as a password to control the client's access to the server.

Your Action

Type a username composed of only alphanumeric characters, the hyphen character, and the underscore character.

For the password, you must enter a value that is no less than 6 and no more than 128 characters long. It must contain at least 1 uppercase character and 1 lowercase character. It can include numbers and special characters.

Type the SNMP community string.

Configuring Basic Settings with a Configuration Editor

To establish basic connectivity on a Services Router, you identify the router, connect the router to the network, and specify basic network settings.

In a typical network, the Services Router has the basic settings listed in

Table 44 on page 110. Determine the values to set on the Services Router in your network.

Table 44: Sample Settings on a Services Router

Services Router Property	Sample Value
Services Router hostname	routera
Access for user “root”	SSH RSA public key
IP address of the NTP server used to synchronize system time	10.148.2.21
on the Services Router
Services Router location	Sunnyvale, California, USA, which is in the
	America/Los_Angeles time zone

110■ Configuring Basic Settings with a Configuration Editor