Juniper Networks manual Reset Config Button, J2320 and J2350 HA LED

Models: J2350

1 280
Download 280 pages 19.02 Kb
Page 40
Image 40

JUNOS Software with Enhanced Services Hardware Guide

Table 8: J2320 and J2350 ALARM LED (continued)

Color

State

Description

Yellow

On steadily

Minor alarm condition requires monitoring or maintenance:

 

 

Indicates a noncritical condition on the router that, if

 

 

 

left unchecked, might cause an interruption in service

 

 

 

or degradation in performance.

 

 

A missing rescue configuration or software license

 

 

 

generates an amber system alarm.

Unlit

Off

No alarms.

For information about alarm conditions and corrective actions, see “Monitoring and Correcting Chassis Alarm Conditions” on page 157. For additional information, see the JUNOS Software Administration Guide.

HA LED

The HA (high availability) LED is located in the front panel near the power status LED of the LED dashboard. The LED lights when the router starts, but otherwise remains unlit.Table 9 on page 16 describes the HA LED.

Table 9: J2320 and J2350 HA LED

Color

State

Description

Green

On steadily

All cluster members and monitored links are available.

Red

On steadily

A cluster member is missing or unreachable, or the other node is no longer part of

 

 

a cluster because it has been disabled by the dual membership and detection

 

 

recovery process in reaction to a control link or fabric link failure.

Amber

On steadily

All cluster members are present, but one or more monitored links are down.

Unlit

Off

The node is not configured for clustering or it has been disabled by the dual

 

 

membership and detection recovery process in reaction to a control link or fabric

 

 

link failure.

RESET CONFIG Button

Use the RESET CONFIG button to return the router to a previous valid configuration or to the factory default configuration, or a rescue configuration. The button is recessed to prevent it from being pressed accidentally. For details about the RESET CONFIG button, see “Resetting the Configuration File When the Router Is Inaccessible” on page 160.

16J2320 and J2350 Services Router Hardware Features

Page 40
Image 40
Juniper Networks Reset Config Button, J2320 and J2350 HA LED, 16 J2320 and J2350 Services Router Hardware Features