Chapter 6: Establishing Basic Connectivity

An OK response verifies that the modem communicates successfully with the

COM port on the PC or laptop.

6.To dial the modem that is connected to the console port on the router, enter ATDT remote-modem-number. For example, if the number of the modem connected to the console port on the router is 0013033033030, enter ATDT 0013033033030.

The router login prompt appears.

7.Log in as the user root. No password is required at initial connection, but you must assign a root password before committing any configuration settings.

Configuring Basic Settings with J-Web Quick Configuration

J-Web Quick Configuration allows you to configure basic settings. Figure 58 on page 103 shows the Quick Configuration page for basic setup.

Figure 58: Set Up Quick Configuration Page

Before you configure the router, gather the information described in “Before You

Begin” on page 95.

Configuring Basic Settings with J-Web Quick Configuration 103

Page 127
Image 127
Juniper Networks J2350 manual Configuring Basic Settings with J-Web Quick Configuration