Juniper Networks J2350 manual Matching the Chassis Slots and Tabs

JUNOS Software with Enhanced Services Hardware Guide

Figure 63: Matching the Chassis Slots and Tabs

3.Lower the cover fully onto the base, and slide it so that the front tabs match the front slots and the chassis cover and base edges align completely.

4.Insert and tighten the flat head screws with a Phillips screwdriver.

5.Return the router to its installation site, and attach the grounding cable and the power cables. (See “Connecting Power” on page 84.)

6.Press and release the power button to power on the router. Verify that the POWER LED lights steadily.

Replacing Internal Compact Flashes on J2320 and J2350 Routers

The internal compact flash provides primary storage for the router and is installed in a slot on the bottom of the J2320 or J2350 chassis (see Figure 64 on page 127). It can accommodate software images, configuration files, and microcode. For information about configuring the internal compact flash, see the JUNOS Software Administration Guide.

NOTE: Use only compact flash cards purchased from Juniper Networks for your

J-series platform and model.

126■ Replacing Internal Compact Flashes on J2320 and J2350 Routers