Juniper Networks manual J2320 and J2350 Front Panel, Front of J2320 Chassis

Chapter 2: J-series Services Router Hardware Features

■USB storage device

Normally, a J2320 or J2350 Services Router boots from the internal compact flash. If the internal compact flash fails, the router attempts to boot from the external compact flash if it is installed. If the external compact flash is not present or fails, the router attempts to boot from the USB storage device.

J2320 and J2350 Front Panel

The front panel of a J2320 or J2350 Services Router (see Figure 8 on page 13 and Figure 9 on page 13) allows you to install or remove PIMs, view router status LEDs, access the console port, and perform simple control functions.

Figure 8: Front of J2320 Chassis

Figure 9: Front of J2350 Chassis

The components of the front panel, are described in the following sections:

■Physical Interface Modules (PIMs) on page 14

■Power Button and POWER LED on page 14

■STATUS LED on page 15

■ALARM LED on page 15

■HA LED on page 16

■RESET CONFIG Button on page 16

■Built-In Gigabit Ethernet Ports on page 17

J2320 and J2350 Services Router Hardware Features ■ 13