Juniper Networks manual Connecting DC Power, Connecting AC Power to the J2350 Services Router

JUNOS Software with Enhanced Services Hardware Guide

Figure 50: Connecting AC Power to the J2350 Services Router

Figure 51: Connecting AC Power to the J4350 or J6350 Services Router

Connecting DC Power

CAUTION: If your J6350 Services Router includes an optional redundant DC power supply, connect each of the two power supplies to different input power sources. Failure to do so makes the router susceptible to total power failure if one of the power supplies fails.

The router must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the router to ground.

For DC cable requirements, see “DC Power, Connection, and Power Cable

Specifications” on page 71.

To connect DC power to the router:

86■ Connecting Power