Juniper Networks J2350 manual Connecting to the CLI Locally

JUNOS Software with Enhanced Services Hardware Guide

Figure 54: Connecting to the Gigabit Ethernet Port on J2320 and J2350 Routers

Figure 55: Connecting to the Gigabit Ethernet Port on J4350 and J6350 Routers

Connecting to the CLI Locally

If you plan to use the CLI to configure the router, you must connect through the console port, as shown in Figure 56 on page 100 and Figure 57 on page 100.

NOTE: Figure 56 on page 100 and Figure 57 on page 100 show a connection to a local management device. A remote connection to the router through a modem requires the cable and connector shown (provided in the router's accessory box), plus a DB-9 female to DB-25 male (or similar) adapter for your modem, which you must purchase separately.

98■ Connecting to a Services Router