Juniper Networks J2350 manual Set Up Quick Configuration Summary, Field Function Your Action

JUNOS Software with Enhanced Services Hardware Guide

To configure basic settings with J-Web Quick Configuration:

1.If you have not already done so, connect a management device to the ge-0/0/0interface on port 0/0. For instructions, see “Connecting to the J-Web Interface” on page 97.

2.If the Set Up Quick Configuration page is not displayed, select Configuration>Quick Configuration >Set Up.

3.Enter information into the Set Up Quick Configuration page, as described in Table 42 on page 104.

4.Click one of the following buttons:

■To apply the configuration and stay in the Set Up Quick Configuration page, click Apply.

■To apply the configuration and return to the Quick Configuration page, click OK.

■To cancel your entries and return to the Quick Configuration page, click Cancel.

NOTE: After initial configuration is complete, the Services Router stops functioning as a DHCP server. If you change the IP address of ge-0/0/0and have the management device configured to use DHCP, you lose your DHCP lease and your connection to the router through the J-Web interface. To reestablish a connection, either set the IP address on the management device manually, or connect ge-0/0/0to the management network and access the router another way—for example, through the console port.

5.To check the configuration, see “Verifying Basic Connectivity and the Configuration” on page 113.

Table 42: Set Up Quick Configuration Summary

Field	Function	Your Action
Identification
Host Name	Defines the hostname of the router.	Type the hostname.
(required)
Domain Name	Defines the network or subnetwork that the	Type the domain name.
	machine belongs to.
Root Password	Sets the root password that user “root” can	Type a plain-text password that the system encrypts.
(required)	use to log in to the router.	NOTE: After a root password has been defined, it is
		required when you log in to the J-Web user interface
		or the CLI.
Verify Root Password	Verifies the root password has been typed	Retype the password.
(required)	correctly.

104■ Configuring Basic Settings with J-Web Quick Configuration