Juniper Networks J2350 manual Port Gigabit Ethernet ePIMs

JUNOS Software with Enhanced Services Hardware Guide

Table 21: Gigabit Ethernet Port LEDs

Function	Color	State	Description
Link	Green	On steadily	Port is online.
	Unlit	Off	Port is offline.
Activity	Green	Blinking	Port is transmitting or receiving traffic.
(TX/RX)
	Unlit	Off	Port might be online, but it is not
			receiving traffic.

For alarms, see the configuring and monitoring alarms information in the JUNOS

Software Administration Guide.

Optical Interface Support. Table 22 on page 44 describes the optical interface support on the 1-port and 6-port Gigabit Ethernet uPIMs over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables.

Table 22: Optical Interface Support for SFP Gigabit Ethernet uPIMs

Parameter	1000Base-SX Transceiver	1000Base-LX Transceiver
Model number	JX-SFP-1GE-SX	JX-SFP-1GE-LX
Maximum distance	500 m (1640 ft) on 50/125-µm	10 km (6.2 mi) on 9/125-µm SMF
	MMF cable	cable
	200 m (656 ft) on 62.5/125-µm	550 m (1894 ft) on MMF cable
	MMF cable
Transmitter	830 nm through 860 nm	1270 nm through 1355 nm
wavelength
Average launch power	–9.5 dBm through –4 dBm	For SMF cable: –9.5 dBm through
		–3 dBm
		For MMF cable: –11.5 dBm through
		–3 dBm
Receiver sensitivity	–21 dBm through –18 dBm	–25 dBm through –20.5 dBm

Copper Interface Support. The 1-port and 6-port Gigabit Ethernet uPIMs also support 1000Base-T SFPs (model number JX-SFP-1GE-T).

1-Port Gigabit Ethernet ePIMs

The 1-port Gigabit Ethernet ePIM is supported on J4350 and J6350 Services Routers and is available in two versions, one with copper connector (see

Figure 26 on page 45), the other with small form-factor pluggable (SFP) transceivers (see Figure 27 on page 45).

44■ Field-Replaceable PIMs