Chapter 5: Installing and Connecting a Services Router

You can center-mount or front-mount the J4350 and J6350 Services Routers in a rack. In general, a center-mount rack is preferable to a front-mount rack because the more even distribution of weight in the center-mount rack provides greater stability.

Many types of racks are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks. For more information about the type of rack or cabinet the J-series router can be installed into, see “Rack Requirements” on page 64.

WARNING: If you are installing multiple routers in one rack, install the lowest one first and proceed upward in the rack. Install heavier routers in the lower part of the rack. The router must be mounted at the bottom of the rack if it is the only unit in the rack.

WARNING: The chassis weighs between 23 lb (10.4 kg) and 30.7 lb (13.9 kg). Read and follow the lifting guidelines in “Chassis Lifting Guidelines” on page 216.

To install the J4350 or J6350 into a rack:

1.Attach the mounting brackets to the sides of the chassis (see

Figure 45 on page 81). You can position the brackets either in the center or the front. Positioning the brackets in the center offers greater stability.

Figure 45: Installing the Mounting Brackets

2.Attach a screw to each rack rail in the third hole down from where you want the top of the router to be positioned. Screw only part way in, leaving about ¼ in. (6 mm) distance between the screw head and the rail (see Figure 46 on page 82).

Installing J4350 and J6350 Routers 81

Page 105
Image 105
Juniper Networks J2350 manual Installing the Mounting Brackets