Juniper Networks J2350 manual Adsl 2/2+ Annex a PIM, LEDs for Adsl PIMs

Chapter 3: PIM Overview

Figure 38: ADSL 2/2+ Annex A PIM

Figure 39: ADSL 2/2+ Annex B PIM

The ADSL PIM provides the following key features:

■Onboard network processor

■ADSL, ADSL2, and ADSL2+ protocols on the same PIM

■“Dying gasp” notification

■Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation

For pinouts of cable connectors for ADSL PIMs, see “ADSL and G.SHDSL RJ-11

Connector Pinout” on page 194.

To install or remove a PIM, see “Replacing a PIM” on page 120.

The ADSL PIMs have two LEDs to indicate the status of the PIM and its port.

Table 32 on page 57 describes the meaning of the LED states.

Table 32: LEDs for ADSL PIMs

Label	Color	State	Description
ONLINE	Green	On steadily	PIM passed the self-test and is online and
			operational.
	Unlit	Off	PIM is offline.
STATUS	Green	On steadily	Online with no alarms or failures.
	Red	On steadily	Active with local or remote alarms. The router
			has detected a failure.

Field-Replaceable PIMs ■ 57