Juniper Networks J2350 manual J4350 and J6350 Front Panel

JUNOS Software with Enhanced Services Hardware Guide

J4350 and J6350 Front Panel

The front panel of the Services Router (see Figure 19 on page 26) allows you to install or remove PIMs, view router status LEDs, access the console port, and perform simple control functions.

Figure 19: Front of J4350 and J6350 Chassis

The components of the front panel, from left to right, are described in the following sections:

■Physical Interface Modules (PIMs) on page 26

■Power Button and POWER LED on page 27

■STATUS LED on page 27

■ALARM LED on page 28

■HA LED on page 29

■RESET CONFIG Button on page 29

■Built-In Gigabit Ethernet Ports on page 29

■Console Port on page 30

■AUX Port on page 30

■USB Port on page 30

Physical Interface Modules (PIMs)

Physical Interface Modules (PIMs) provide the physical connection to various network media types. For information about individual PIMs, see “Field-Replaceable PIMs” on page 38.

For pinouts of PIM cable connectors, see “Network Cable Specifications and Connector Pinouts” on page 179. For PIM replacement instructions, see “Replacing a

PIM” on page 120.

Each J4350 and J6350 Services Router has six front panel slots for field-replaceable PIMs. These slots are numbered from top to bottom and from left to right as shown in the slot number diagram on the front panel, shown in Figure 20 on page 27.

26■ J4350 and J6350 Services Router Hardware Features