Chapter 8: Replacing Hardware Components

Figure 69: Removing the J4350 or J6350 Compact Flash

8.Place the compact flash on the antistatic mat or in the electrostatic bag.

9.Slide the new compact flash into the slot and press down, as shown in Figure 70 on page 131.

Figure 70: Inserting the J4350 or J6350 Compact Flash

NOTE: On some Services Routers the compact flash is in a horizontal position. If the compact flash connection is horizontal, lay the compact flash behind the slot and slide it forward until it clicks into place.

10.Slide the cover onto the chassis.

11.Replace and tighten the screws on the sides and top of the chassis that secure the cover to the chassis.

Replacing Internal Compact Flashes on J4350 and J6350 Routers 131

Page 155
Image 155
Juniper Networks J2350 manual Removing the J4350 or J6350 Compact Flash