Chapter 6: Establishing Basic Connectivity

Using the JUNOS Software with Enhanced Services Configuration Wizard

Before you use the CLI configuration wizard, log in to the Services Router console as described in “Connecting to the CLI Locally” on page 98 or “Connecting to the CLI Remotely” on page 100

To invoke the configuration wizard, enter config-wizardat the console prompt. After you invoke the wizard, it presents the following series of prompts. Follow the prompts as described in Table 43 on page 107.

Table 43: Basic Configuration Wizard Summary

Prompt

Function

Your Action

Identification

Enter host name:

Defines the hostname of the router.

Type the hostname. Alphanumeric, hyphen, and underline characters are allowed.

Please enter root password:

Retype root password:

Would you like to configure a domain name? [yes, no] (no):

If you enter y(es), the configuration wizard presents the following prompt.

Sets the root password that user “root”

Type a plain-text password that

can use to log into the router.

the system encrypts.

 

NOTE: After a root password has

 

been defined, it is required when

 

you log into the J-Web user

 

interface or the CLI.

Verifies that the root password has

Retype the password.

been typed correctly.

 

Defines the network or subnetwork

Type the domain name.

that the machine belongs to.

Alphanumeric, hyphen, period,

 

and underline characters are

 

allowed.

Enter domain name:

Configuring Basic Settings Using the CLI Configuration Wizard

107

Page 131
Image 131
Juniper Networks J2350 manual Basic Configuration Wizard Summary, Prompt Function Your Action, Enter host name