JUNOS Software with Enhanced Services Hardware Guide

3.Align the top hole in each mounting bracket with a hole in each rack rail as shown in Figure 43 on page 80 and Figure 44 on page 80, making sure the chassis is level.

Figure 43: Hanging a J2320 Router in a Rack

Figure 44: Hanging a J2350 Router in a Rack

4.Have a second person install a mounting screw into each of the two aligned holes. With a number 2 Phillips screwdriver, tighten the screws.

5.Verify that the mounting screw on one side of the rack is aligned with the mounting screw on the opposite side and that the router is level.

6.Install the second screw in each mounting bracket.

Installing J4350 and J6350 Routers

WARNING: DC-powered Services Routers are intended for installation only in a restricted access location.

80Installing J4350 and J6350 Routers

Page 104
Image 104
Juniper Networks J2350 manual Installing J4350 and J6350 Routers