FURNACE COMPONENTS
2 | 17 | |
12 | 3 | |
4 | ||
1 | ||
| ||
5 | 18 | |
| ||
| 6 | |
11 | 5 | |
| ||
| 15 | |
16 | 14 | |
| 13 |
7
9
8
19
10
A07609
Fig. 2 - Model 355CAV Furnace
1.
2.Burner sight glass for viewing burner flame.
3.Burner assembly (inside). Operates with
4.Redundant gas valve. Safe and efficient. Features 1 gas control with 2 internal shutoff valves and one throttling valve.
5.Vent outlet. Uses PVC pipe to carry flue gas from the furnace’s combustion system (right or left side).
6.Inducer motor. Pulls hot flue gases through the heat exchangers, maintaining negative pressure for added safety.
7.Blower access panel safety interlock switch.
8.Air filter and retainer (location in furnace may vary).
9.Condensate drain connection. Collects moisture condensed from burned gases for disposal into home drain system. (Location in furnace varies.)
10.
11.Everlastict Secondary condensing heat exchanger (inside). Wrings out more heat through condensation. Constructed with
12.Primary serpentine heat exchanger (inside). Stretches fuel dollars with the
13.Furnace control board.
14.
15.Light emitting diode (LED) on furnace control board. Status code light is for diagnosing furnace operation and service requirements.
16.Pressure switches ensure adequate flow of flue gas through furnace and out vent system.
17.Rollout switch (manual reset) to prevent overtemperature.
18.Junction box for
19.Transformer (24v) behind furnace control board provides
3