Samsung HT-F4550/ZF manual Installing the Speakers on the Tallboy Stand, Connecting The Speakers

HT-F4550

(L) (R) (L) (R)

SPEAKER CABLE SCREW (5x20): 16EA

FRONT / SURROUND STAND STAND BASE CENTRE SUBWOOFER

Installing the Speakers on the Tallboy Stand

03 Connections

* HT-F4550 only - Front/Surround Speakers

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Use the driver to combine the screws on the 3 marked holes.

3.Straighten a supplied speaker wire to the gravity direction and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver.

And then connect a speaker cable.

6.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

1 Stand Base 2

Stand

34

Speaker

Stand

56

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.

2.To attach speaker wire to each speaker:

a.Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.

b.Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.

3.Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.

Black Red

English 13