Manuals / Tascam / Kitchen Appliance / Double Oven

Tascam DM-3200 owner manual 9 – Specifications : Messages and troubleshooting, sync

Models: DM-3200

1 120

Download 120 pages 30.73 Kb

Page 114

sync).

9 – Specifications : Messages and troubleshooting

Action	Message		Meaning

✖	Signal info : Digital In1		No signal received at a digital input when detail is requested
	No signal
	Press ENTER to continue.

✔	Signal info	: TDIF1	Detail information popup for digital audio I/O (TDIF)
✔	Input
	Input
	Rx mode	: Double-line
	Fs	: 192kHz
	Word Length	: 24bit
	Emphasis	: None
	Output
	Tx mode	: Normal
	FS	: 44.1kHz
	Word Length	: 24bit
	Emphasis	: No
	Press ENTER to continue.

✖	Slot AES3 Card INPUT LINE1		Digital audio data error from AES card (non-audio data).
	Error
	Not audio signal
	Press ENTER to continue.

✖	Slot AES3 Card INPUT LINE1		Digital audio data error from AES card (non-audio data has caused loss of word
	Error		sync).
	Source Fs unlocked
	Not audio signal
	Press ENTER to continue.

✖	Slot AES3 Card INPUT LINE1		Digital audio data error from AES card (loss of word sync).
	Error
	Source Fs unlocked
	Press ENTER to continue.

✔	Snapshot BANK a-bbb		Information on a snapshot.
✔	Name	: TASCAM DATA
	Name	: TASCAM DATA
	Xtion Time	: 9.9ms
	Create data	: DEC/15/2004
		20: 35: 45
	Project Name	: PROJECT ORCA
	Project FS	: 44.1kHz
	Press ENTER to continue.

✔	Snapshot Preset 1-bbb		Information on a preset snapshot.
✔	NAME : TASCAM DATA
	NAME : TASCAM DATA
	Press ENTER to continue.

●	Snapshot redo completed.		A snapshot redo operation is complete.
●	Snapshot undo completed.		A snapshot undo is complete.
●	Snapshot		A snapshot has been recalled.
	Bank a-bbb recalled.
●	Snapshot		A snapshot preset has been recalled.
	Preset 1-bbb recalled
✔	Source Invert Ch1-Ch8		Confirmation of bulk change of input from input to return (or vice versa).
✔	Press ENTER to confirm,
	Press ENTER to confirm,
	or a cursor key to cancel.

✖	Snapshot		An attempt has been made to overwrite or delete a preset snapshot.
	Preset 1-bbb is Read-only!
✖	STEREO to AUX1-2 is assigned		Stereo buss is assigned to Aux 1-2.
	Press ENTER to continue.
●	Stored to EFFECT Library		Stored an effect library entry.
	BANK a-bbb

●	Stored to xxxx Library		Stored a library entry where xxxx is EQ, gate or compressor/expander from the
	BANK a-bbb from CHx.		selected channel.

Table 9.2: Popup messages

114 TASCAM DM-3200 Owner’s Manual

Image 114

Tascam owner manual 9 – Specifications : Messages and troubleshooting, sync, TASCAM DM-3200Owner’s Manual

Contents

Digital Mixing Console OWNER’S MANUALD001865710A HAZARD, DO NOT EXPOSE THIS IMPORTANT SAFETY PRECAUTIONSWARNING: TO PREVENT FIRE OR SHOCK APPLIANCE TO RAIN OR MOISTUREIMPORTANT SAFETY INSTRUCTIONS 2 – Basic operational concepts Contents1 – Introduction 4 TASCAM DM-3200Owner’s Manual5 – Channel modules 3 – Connections4 – Routing & assignment Contents7 – MIDI 9 – Specifications6 – Effects 8 – Remote operation2 ––Basicoperational concepts List of Figures1 ––Introduction 3 ––Connections8 ––Remoteoperation 9 ––Specifications6 ––Effects 7 ––MIDIOther key points 1 – IntroductionComputer DAW integration Please read this manual1 – Introduction : About the DM-3200 About the DM-3200Inputs hardwarte Effects 1 – Introduction : Unpacking the DM-3200Unpacking the DM-3200 •The Quick Reference GuideWhat’s in the manual 1 – Introduction : About the manualAbout the manual 2, “Basic operational concepts” pageSpecial notes for touch-sensitivefaders Copyright, etcAnalog input section 1 – Introduction : The features of the DM-3200The features of the DM-3200 Monitoring sectionLibrary section and CF card slot Module & layer control sectionModifier section Machine control section2 – Basic operational concepts Smart keysWhat’s on the screen? 2 – Basic operational concepts Jumping to commonly-usedscreensEncoder mode Automation statusFader layers 2 – Basic operational concepts : Special controlsSpecial controls The PODsscreen 2 – Basic operational concepts : Special controlsFigure 2.4: POD knobs used in a multi-control Figure 2.7: POD 1 used with a pull-upmenu listEncoders GATE/DYN dynamics processor mode2 – Basic operational concepts : Encoders Encoder mappings2 – Basic operational concepts : Encoders Reading the encoder indicatorsFigure 2.11: Encoders in pan mode Hard left2 – Basic operational concepts : Encoders No cut or boostEncoder behavior 2 – Basic operational concepts : Encoders2 – Basic operational concepts : CF cards CF cardsFormatting a new card IMPORTANT CAUTION!!! Data associated with How to shut down the DM-3200 In order toShutting down the DM-3200 Starting up the DM-3200About projects and libraries Setting the date and time Creating a new projectManaging projects Figure 2.24: The project management pageSaving project data Library management Library utilities Target area Target areaSOURCE areaFigure 2.28: Library utility screen SETUP screen Naming library entriesOptions 2 – Basic operational concepts : Options Figure 2.30: The SETUP option screenFigure 2.31: Display top line set to SYSTEM PREFERENCES Encoder Mode Follows Current ScreenCurrent Screen Follows Encoder Mode 2 – Basic operational concepts : OptionsSOLO 2 – Basic operational concepts : OptionsFigure 2.33: SOLO options 2 – Basic operational concepts : Utilities UtilitiesUTILITY copying SWITCH utility Figure 2.35: UTILITY external switch settings2 – Basic operational concepts : Utilities Stereo outs connector3 – Connections 2-trackin3 – Connections : Analog connections Analog connectionsMic/line connections Analog outputs 3 – Connections : Digital connectionsDigital connections Digital audio I/ODigital I/O setup Figure 3.3: DIGITAL SETUP screen3 – Connections : Digital connections Slot card configuration 3 – Connections : Other connectionsOther connections 3 – Connections : Other connections TASCAM DM-3200User’s Manual3 – Connections : Clock setting Clock setting3 – Connections : Clock setting Normal4 – Routing & assignment Figure 4.1: Module facilities on the DM-32004 – Routing & assignment : Routing RoutingInput routing 4 – Routing & assignment : Routing 2Move to the on-screenbutton SOURCE INVERTOutput routing 4 – Routing & assignment : RoutingInsert patching 4 – Routing & assignment : RoutingAssignment using the front panel Channel-to-bussassignmentFigure 4.7: Buss assignments with the pan switch 52 TASCAM DM-3200User’s ManualNon-channelassignments Assignments from Figure 4.8: Surround channel assignment screen4 – Routing & assignment : Monitoring MonitoringSelecting the CR source Studio cue source 4 – Routing & assignment : MonitoringTalkback, etc Oscillator and noise generator4 – Routing & assignment : Monitoring Figure 4.12: Metering screen 1st 24 channel Meters4 – Routing & assignment : Monitoring module metersSoloing 4 – Routing & assignment : Monitoring58 TASCAM DM-3200User’s Manual 5 – Channel modules General principles5 – Channel modules : Global module settings Global module settingsFader control 5 – Channel modules : Global module settings5 – Channel modules : Dynamics processors Dynamics processorsGates input channels 1–32 Compressor/expanders5 – Channel modules : Dynamics processors Program Preset dynamics library entries5 – Channel modules : Dynamics processors Name5 – Channel modules : Dynamics processors Trigger settingsTable 5.8: Gate/Expander preset library entries ProgramHigh-midband: Peak or Notch 5 – Channel modules : EQLow-midband: Peak or Notch Shelving filters high and low: Gain and Frequency5 – Channel modules : EQ EQ libraryTable 5.12: EQ library presets Figure 5.11: EQ library5 – Channel modules : Aux and buss setup Aux and buss setupAux send pan/balance screens linked 5 – Channel modules : Aux and buss setupFigure 5.15: Aux pan/balance screen linked 5 – Channel modules : Module setup Module setupPhase/trim/delay 5 – Channel modules : Module setupStereo linking 5 – Channel modules : Module setupMute groups 5 – Channel modules : Module setupFader groups 5 – Channel modules : Module setupSurround operations Changing surround mode5 – Channel modules : Surround operations Assigning channels to surround bussesFigure 5.30: Surround assignment Surround panning5 – Channel modules : Surround operations Figure 5.31: Surround overviewFigure 5.33: Surround panning pan mode on 5 – Channel modules : Surround operationsLFE level 5 – Channel modules : Surround operations5 – Channel modules : Snapshots SnapshotsSnapshot library management Storing snapshots Information about a snapshot5 – Channel modules : Snapshots Setting up the effects 6 – EffectsRouting the effects 6 – Effects : Setting up the effects TASCAM effect parametersTC Works effect parameters 6 – Effects : Setting up the effectsPreset TC Reverb effects 6 – Effects : Effect librariesEffect libraries 6 – Effects : Effect libraries NumberTASCAM DM-3200User’s Manual 6 – Effects : Effect libraries Number86 TASCAM DM-3200User’s Manual Preset TASCAM effects 6 – Effects : Effect librariesTASCAM DM-3200User’s Manual Preset 6 – Effects : Effect libraries88 TASCAM DM-3200User’s Manual Preset 6 – Effects : Effect librariesTASCAM DM-3200User’s Manual Preset 6 – Effects : Effect libraries90 TASCAM DM-3200User’s Manual MIDI port switching and filtering 7 – MIDIMIDI Implementation Charts Program Change messages and the DM-32008 – Remote operation Selecting devices for transport controlDeleting devices from the list Auto-detectionof devicesSelecting the control type for the devices Transport mapping memories Editing a mapping To use a transport mappingViewing the transport mappings 1Press and hold down the MACHINE SEL F7 keyCueing mode 8 – Remote operation : Machine control setupMachine control setup Play Mode8 – Remote operation : Machine control setup Record Command TypeLocate Preroll 98 TASCAM DM-3200User’s ManualSelecting the location point display 8 – Remote operation : Location memoriesLocation memories Storing a location memory “on the fly”Repeat play Viewing a list of location memoriesManual location 8 – Remote operation : Location memoriesAuto punch operations ALL INPUT and AUTO MON8 – Remote operation : Location memories 9 – Specifications Analog audio I/O102 TASCAM DM-3200Owner’s Manual Miscellaneous I/O connections 9 – Specifications : Digital audio I/ODigital audio I/O TASCAM DM-3200Owner’s ManualEqualization 9 – Specifications : EqualizationPhysical characteristics System performance9 – Specifications : Dimensional drawing Dimensional drawingMessages and troubleshooting 9 – Specifications : Messages and troubleshooting 106 TASCAM DM-3200Owner’s Manual9 – Specifications : Messages and troubleshooting corruptTASCAM DM-3200Owner’s Manual 9 – Specifications : Messages and troubleshooting Results of performing a word sync check108 TASCAM DM-3200Owner’s Manual 9 – Specifications : Messages and troubleshooting Confirmation when copying automation configurationTASCAM DM-3200Owner’s Manual 9 – Specifications : Messages and troubleshooting A library preset entry has been recalled effect110 TASCAM DM-3200Owner’s Manual 9 – Specifications : Messages and troubleshooting Information about a library entry gateTASCAM DM-3200Owner’s Manual 9 – Specifications : Messages and troubleshooting project to another112 TASCAM DM-3200Owner’s Manual Meaning 9 – Specifications : Messages and troubleshootingAction Message TASCAM DM-3200Owner’s Manual9 – Specifications : Messages and troubleshooting sync114 TASCAM DM-3200Owner’s Manual Stored a snapshot 9 – Specifications : Messages and troubleshootingDM-3200can be rebooted changed9 – Specifications : Block diagram Block diagram116 TASCAM DM-3200Owner’s Manual 9 – Specifications : Level diagram Level diagramTASCAM DM-3200Owner’s Manual Notes 118 TASCAM DM-3200Owner’s ManualNotes TASCAM DM-3200Owner’s ManualTEAC AMERICA, INC DM-3200TEAC CORPORATION TEAC CANADA LTD