Tascam DM-3200 9 – Specifications : Messages and troubleshooting, Action Message, Meaning

9 – Specifications : Messages and troubleshooting

Action Message		Meaning
✔	Paste Buffer data to Chx?	Confirmation shown before pasting copied configuration data to a channel.
	Press ENTER to confirm,
	or a cursor key to cancel.

✔Paste Ch2 Automation configuration. Confirmation shown before pasting copied automation configuration data to a channel.

✔	Program Change Table		Confirmation shown before making a batch change to the Program Change
	OK to perform Batch Setup?		table.
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Project data and		Shown on power-up. Data has been changed since the project was saved;
	resume data are different.		should this changed data be loaded?
	The project data is loaded
	ENTER key : from internal memory.
	CURSOR key : from CF card.
✔	Recall Automation data?		Confirmation that loading the selected automation data will overwrite the
	Current data will be erased.		existing data
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Re-assign fader grouping layer?		Confirmation when re-assigning a grouping layer master
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Re-assign fader grouping?		Confirmation when re-assigning a fader group master
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Re-assign fader (mute) group?		Confirmation when changing a setting
	Press ENTER to confirm,
	or a cursor key to cancel.
●	Snapshot		Successful recall of snapshot data
	BANK a-bbb Recalled.
✔	SELECT xxxx MODE		Confirmation that the surround mode will change (to STEREO, 5.1, 6.1 or LRCS).
	Press ENTER to confirm,
	or a cursor key to cancel
✔	Shut down?		Confirmation of shutdown (after pressing SHIFT+CTRL+ALT)
	Press ENTER to confirm,
	or a cursor key to cancel.
✔	Shutdown was not performed		On power-up — a shutdown was not performed properly. Should data changed
	correctly last time.		after the project was last stored be loaded?
	The project data is loaded:
	ENTER key : from internal memory
	Cursor key : from CF card.
✔	Signal info	: Digital out1	Detail information popup for digital audio output
	Format	: AES/EBU
	Contents	: Audio
	Emphasis	: On
	Channel Mode	: Stereo
	FS	: 44.1kHz
	Word Length	: 24bit
	Press ENTER to continue.
✔	Signal info	: Slot1 AES3 Card	Detail information popup for digital audio I/O (AES card)
	INPUT LINE1
	Format	: AES/EBU
	Contents	: Audio
	Emphasis	: None
	Channel Mode	: Stereo
	FS	: 44.1kHz
	Word Length	: 24bit
	Press ENTER to continue.
			Table 9.2: Popup messages

TASCAM DM-3200 Owner’s Manual 113