Honeywell CV31 user manual How to Connect a Headset, About USB Scanners Connect a USB Scanner

Chapter 1 — About the Computer Features

About USB Scanners

To use a USB scanner with the CV31, you need to configure the scanner as a Human Interface Device (HID). When HID is enabled, scanned bar code data is sent directly to an active window as if the data came from a keyboard. You need to configure any data handling settings in the scanner with the scanner manufacturer’s configuration bar codes. For help, see the scanner user manual.

Connect a USB Scanner

Connect a USB tethered scanner to the AUX port.

1Connect an appropriate USB cable to the AUX port on the computer.

2Connect the scanner to the USB cable.

How to Connect a Headset

Use one of these methods to connect a headset or audio device:

•Plug a 3.5 mm (1/8") headset into the headset jack. Note that the headset jack on the CV31 is not the same size as the headset jack on the CV30 (2.5 mm, 3/32").

•Use the Bluetooth Audio applet.

•Pair a Vocollect Bluetooth headset with the near-field communication (NFC) radio.

14 Thor CV31 Vehicle-Mount Computer User Manual