Honeywell CV31 user manual Configure Bluetooth Communications, Tap Communications Bluetooth

Chapter 3 — Configure the Computer

By default, the Bluetooth radio is on. The Bluetooth radio maintains its current state through a warm or cold boot and maintains virtual COM ports. But, if you clean boot the computer, you need to recreate pairings with Bluetooth devices.

Configure Bluetooth Communications

Before you can connect to a Bluetooth device, you need to configure the Bluetooth radio so that your computer is discoverable and connectable.

1Start Intermec Settings.

2Tap Communications > Bluetooth.

3Make sure that the Power is On and Discoverable and Connectable are both Enabled.

4Exit Intermec Settings.

Other Bluetooth devices can discover and connect to your computer.

Connect a Bluetooth Scanner with the Quick Connect Bar Code

Scan the Quick Connect bar code to easily connect your CV31 to a Bluetooth scanner, such as an Intermec SF51 or SR61. By default, when you connect a Bluetooth scanner, the scanner settings are overwritten by the computer settings for the scanner. You can change this setting in Intermec Settings.

1To keep the scanner settings, start Intermec Settings: a Tap Data Collection > Bluetooth Scanners.

b Tap BT-Configure on connect, select Keep scanner settings, and tap OK.

c Tap Back twice to return to the main menu. d Exit Intermec Settings.

2With your Bluetooth scanner, scan the Quick Connect bar code on either side of the computer.

3When prompted, enter the passcode for your scanner. For Intermec Bluetooth scanners, the default passcode is 0000.

The scanner pairs with your computer.

Thor CV31 Vehicle-Mount Computer User Manual 39