Honeywell CV31 For Association, select WPA or WPA2, For Validate Server Certificate, select Yes

Chapter 3 — Configure the Computer

4Enter the SSID.

5For Association, select WPA or WPA2.

The default encryption is TKIP or AES, respectively.

6For 8021x, select TTLS, PEAP, EAP-FAST, or TLS.

7If you selected TTLS, PEAP, or EAP-FAST:

a For Prompt for Credentials, select Enter credentials now. b Enter a User Name and User Password.

8If you selected TLS, enter a User Name and Subject Name.

9For Validate Server Certificate, select Yes.

10Tap OK.

Configure WPA or WPA2 Personal (PSK) Security with Funk Security

Before you set WPA or WPA2 Personal (PSK) security, you need to know the pre-shared key for your access point or passphrase for your authenticator. On your computer, you need to enable the radio and set the date.

1Start Intermec Settings.

2Select Communications > 802.11 Radio > Funk Security.

3Select a Funk security profile to configure.

4Enter the SSID.

5For Association, select WPA or WPA2.

The default encryption is TKIP or AES, respectively.

6For 8021x, select None.

7For Pre-Shared Key, enter the pre-shared key or passphrase:

•Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for your access point.

•Enter the passphrase (8 to 63 ASCII characters) for your authenticator. The computer internally converts the passphrase to a pre-shared key.

8Tap OK.

Thor CV31 Vehicle-Mount Computer User Manual 43