Honeywell CV31 user manual Scanner Settings, Scanner Setting Default Value, Imager Settings

Appendix B — Device Settings

Scanner Settings

Scanner Setting	Default Value
Tethered Scanner (COM1) Scanner	SR Intermec Scanner
Model
Tethered Scanner (COM3) Scanner	ASCII
Model
Trigger Mode	Level
Aimer Mode	Typical aimer
Hardware Trigger	Enable
Trigger Timeout (sec)	2
Aiming Duration (msec)	500
Turn Off After Good Read	Enable/One-shot
Number of Good Read Beeps	1
Energy Saver Mode	Disable
Imager Settings
Imager Setting	Default Value
Predefined Modes	1D and 2D Standard
Sticky Aimer LED Duration	0
Imager Decode Mode	2D Imager
Lighting Mode	Illumination LED Priority
Lighting Goal	40
Top Position	0
Bottom Position	479
Illumination Level	100
Initial 1D Search Area	Smart Raster
Enable Direct Product Marking (DPM)	Enable
Mode
Enable DPM Automatice Exposure	Enable
Control (AEC)
AEC area	Small (center)
Damaged 1D Codes	Disable
Image File Location	\My Documents\MDI

74 Thor CV31 Vehicle-Mount Computer User Manual