Chapter 3 — Configure the Computer

Configure the Computer Remotely with SmartSystems

You can use Intermec Settings from a SmartSystems console to remotely configure all the Intermec computers. For help using Intermec Settings, click Help > Contents. For information on all the parameters in Intermec Settings, see the Intermec Settings Command Reference Manual.

1In the SmartSystems console, select a computer and then right-click on it. A list appears.

2Select Start Intermec Settings.

3Configure the settings you want to change. As you select parameters, help for each parameter appears in the upper right pane.

4When you are done making changes, select File > Save Settings.

About Network Communications

You can use the mobile computer in your wireless or wired data collection network. You can connect your computer using:

802.11 radio communications.

Ethernet communications.

Bluetooth communications.

USB and serial communications.

About 802.11 Radio Communications

The computer has an 801.11a/b/g/n radio to transfer data using wireless communications. Before you configure radio communications, you need to set up your wireless network, including your access points.

About Bluetooth Communications

The computer is Bluetooth-enabled, which lets you connect to these

Bluetooth devices:

Scanners

Printers

Audio devices

Wireless readers

38

Thor CV31 Vehicle-Mount Computer User Manual

Page 46
Image 46
Honeywell CV31 user manual Configure the Computer Remotely with SmartSystems, About Network Communications