HP 8753E manual Front Panel Features, Disk eject button

Front Panel Features

Caution Do not mistake the line switch for the disk eject button. See the figure below. If the line switch is mistakenly pushed, the instrument will be turned off, losing all settings and data that have not been saved.

Y14

Figure l-l. HP 8753E Front Panel

F’igure l-l shows the location of the following front panel features and key function blocks. These features are described in more detail later in this chapter, and in Chapter 9, “Key Definitions n

1.LINE switch. This switch controls ac power to the analyzer. 1 is on, 0 is off.

2.Display. This shows the measurement data traces, measurement annotation, and softkey labels. The display is divided into specific information areas, illustrated in F’igure l-2.

3.Disk drive. This 3.5 inch drive allows you to store and recall instrument states and measurement results for later analysis,

4.Disk eject button.

5.Softkeys. These keys provide access to menus that are shown on the display.

6.S!CMULUS function block. The keys in this block allow you to control the analyzer source’s frequency, power, and other stimulus functions.

7.RESPONSE function block. The keys in this block allow you to control the measurement and display functions of the active display channel.

7.ACI’IVE CEWUNEL keys. The analyzer has two independent primary channels and two auxiliary channels. These keys allow you to select the active channel. Any function you enter applies to the selected active channel.

1 4 HP 8753E Description and Options