activates editing mode for the segment titled “SEQ3” (default title).

activates editing mode for the segment titled “SEQ4” (default title).

activates editing mode for the segment titled “SEQ5” (default title).

activates editing mode for the segment titled “SEQG” (default title).

accesses a filenaming menu which is used to automatically increment or decrement the name of a file that is generated by the network analyzer during a SEQUENCE.

leads to a series of service and test menus described in detail in the On-Site Sgvtkm Semrice Manual.

a collection of common modes used for troubleshooting.

goes to the address menu, which is used to set the HP-IR address of the analyzer, and to display and modify the addresses of peripheral devices in the system.

allows you to set the analyzer’s internal clock.

allows you to set the day in the analyzer’s internal clock.

(Option 010 only) changes the frequency sweep to harmonic intervals to accommodate time domain low-pass operation (option 010). If this mode is used, the frequencies must be set before calibration.

allows you to set the hour in the analyzer’s internal clock.

allows you to set the minutes in the analyzer’s internal clock.

allows you to set the month in the analyzer’s internal clock.

sets the measurement reference plane to the TRLLRM REF’LECT standard.

sets the measurement reference plane to the TRIJLRM THRU standard.

allows you to set the year in the analyzer’s internal clock.

sets the characteristic impedance used by the analyzer in calculating measured impedance with Smith chart markers and conversion parameters Characteristic impedance must be set correctly before calibration procedures are performed.

sets up four-graticule, four-channel display as described in the

.:.:.:.:.:.:.:.:.:...:...:.~.~:..-;:~~,:..;.:..~.:~.;:;.:~~...~.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.~:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:...:.::.:...,,:.:.:~,~,,:

 

 

~:~~~~~~~~~ menu.

....A......A..?...:...:i.~.......................: ::....:ii..:

...A..:.....::::.....:.:....:::::...i..............i

....

..~......~~

sets up two-graticule

four-channel display as described in the

‘,:,:,

 

..?....

menu.

igjgj!ggg@pi..’ ..,.,~~~~~.

 

:.:.:.~.:.:.:.::.:.:.:...:.:.,.:.~:.,.:.:.~ .,.,.:.~:.:.:.:.:.:.:.~.:.:.:.:.::.~~---i-~.:.:.:.:.:.:.:.:.:.:...:.:.::.:.:.:.:.:.:.~.~.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.,.:.:.:.:.,.:,~,,,

 

 

sets

up single-graticule, four-channel display as described in the

~:.‘Z’~~~~” y ‘1 ““” i.~~~.~i menu.

.._...........-..

-.--.

.,.,.,.,.,,_:_p.,_.:.:.x:

- ..-.........- -

942 Key Definitions

Page 531
Image 531
HP 8753E manual ~~~~~~~~~~ menu