HP 8753E manual Analog BUS Disabled IN6KHZ if BW

ANALOG BUS DISABLED IN6KHZ IF BW

Error Number When you press~~~~'~~~~~~~~,,, the analogbusis disabled and not

212available for use in troubleshooting. For a description of the analog bus, refer to the HP 875333 Semvice Guide.

ANOTHER SYSTEM CONTROLLER ON HP-IB BUS

Error Number You must remove the active controller from the bus or the controller must

37 relinquish the bus before the analyzer can assume the system controller mode.

ARGUMENT OUT OF RANGE

Error Number The argument for a programming command is out of the specified range. Refer

206to the HP 8753E Programming and Command lilt.#r- tiide for a list of programming commands and argument ranges.

ASCII: MISSING 'BEGIN' STATEMENT

Error Number The CITIflle you just downloaded over the HP-IB or via disk was not properly

193 organized. The analyzer is unable to read the “BEGIN” statement.

ASCII: MISSING 'CITIFILE' STATEMENT

Error Number The CITIflle you just downloaded over the HP-IB or via disk was not properly

194 organized. The analyzer is unable to read the “CITIFILE” statement.

ASCII: MISSING 'DATA' STATEMENT

Error Number The CITIflle you just downloaded over the HP-B3 or via disk was not properly

195 organized. The analyzer is unable to read the “DATA” statement.

Error Messages 1O-3