HP 8753E To Activate Display Markers, Or ~~~~~7, ‘Ib switch off all of the markers, press ~~~

To Activate Display Markers

lb switch on marker 1 and make it the active marker, press:

(Iizzia .~..~~~~~

The active marker appears on the analyzer display as V. The active marker stimulus value is displayed in the active entry area. You can modify the stimulus value of the active marker, using the front panel knob or numerical keypad. All of the marker response and stimulus values are displayed in the upper right comer of the display.

Figure 2-8. Active Marker Control Example

To switch on the corresponding marker and make it the active marker, press:

ihk,,....,, ,,,,,,.,.,,,,.>,I. ?cz;.:.. ~~~: ~~~	or ~~~~~“7
.::::.w..::::::;:::::::::::::.~:;&:: ..i: 9 .‘:....::~~~~~~~~~:::.:----.~~~~~~~ .:*:~~<;~<: ..,_.. :u::..p.*~~~ 9	.. ,_,, ::*:,; ,,,, :~...i.~.~~v::~. ,. /

All of the markers, other than the active marker, become inactive and are represented on the analyzer display as A.

Figure 2-9. Active and Inactive Markers Example

‘Ib switch off all of the markers, press:

../_; / .,.,. ....,,,, .,....., .,...._

~~~,

. . i..;,; ...i..

2-l 8 Making Measurements