Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP setup software in the address box of the browser.
Example when entering an IPv4 address:
http://192.168.0.10
Example when entering an IPv6 address:
http://URL registered using IPv6 address
http://[IPv6 address]
Important:
•When the HTTP port number is changed from "80", enter "http://IP address of the camera + : (colon) + port number" in the address box of the browser, for example, "http://192.168.0.11:8080".
•When the PC is in a local network, configure the proxy server setting of the web browser (under "Internet Options…" under "Tools" of the menu bar) to bypass the proxy server for the local address.
Step 3
Press the [Enter] key on the keyboard.
→The "Live" page will be displayed.
When "On" is selected for "User authentication", the authentication window will be displayed before dis- playing live images for the user name and password entries. The default user name and password are as follows.
User name: admin
Password: 12345
Important:
•To enhance the security, change the password for the user "admin". It is recommended to change this password periodically.
•When displaying multiple
Notes:
•Up to 16 users can access the camera concurrently regardless of the image type
•When "On" is selected for
•The refresh interval of JPEG images will be limited to 15 fps at the maximum when transmitting JPEG and
4