Samsung M60 manual 183, QWhen no headset is found or cannot be connected

QWhen no headset is found or cannot be connected

A1 If the headset is already connected to another device, you will not be able to find the headset and cannot connect to the headset even if the headset is found. Disconnect the connection to the other device and then start the search again.

A2 If the headset is connected to a power adapter, you cannot make a Bluetooth connection.

Disconnect the power adapter and then retry.

A3 In general, a Bluetooth headset has 2 operating modes, On/Off mode and Pairing mode.

To connect the headset to another Bluetooth device such as a PC or cell phone, the headset must be in Pairing mode.

Switch the headset to Pairing mode and then retry the search operation.

In general, the headset in Pairing mode automatically returns to On/Off mode after a certain period of time.

QThere is no sound or sound is intermittently interrupted after connecting a headset

A1 If your headset is a mono headset, check if a mono headset connection has been made. In this case, to resolve the problem, complete the procedures below.

Double-click the Bluetooth icon in the notifiication area of the Taskbar, select the Audio tab and check the connectivity of the Bluetooth Hands

Free Audio Device that corresponds to the headset in the Connected Device List. If it is not con-nected, right-click over the device and select Connect.

Right-click the Speaker icon in the notifiication area of the Taskbar, select Play Device > Bluetooth Audio > Load Defaults and then click the OK button.

After changing the Bluetooth or sound settings, you have to exit and re-launch the audio and video player programs to apply the changes.

Note

The Bluetooth Mono Headphone and Microphone functions are activated.

183