Samsung M60 manual Wireless Network Wlan Related, 178, QI cannot find an AP

Click Start > Control Panel > Network and

Internet > Network and Sharing Center > Manage Network Connections.

Right-click on the Wireless Network Connections and select Disable.

QWhen I am connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN.

AWhen the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps.

Wireless Network (WLAN) Related

QI cannot find an AP.

AVerify whether the Wireless LAN LED is on.

If it is turned off, turn it on by pressing the Wireless LAN On/Off button (Fn + ).

QThe Wireless LAN device is operating properly, but I cannot connect to the Internet or to another computer.

►This is due to an incorrect configuration, or a configuration error. Check the following:

A1 If you are using a computer-to-computer (Ad Hoc) network connection, check that the name of the configured network (SSID) is correct.

A2 If you are using a network key (encryption key), you have to use the same network key for an AP (Access Point) or a computer-to-computer network (Ad Hoc). The network key of the AP is configured in the AP management program. Ask your network administrator or AP manager for more detailed information.

178