Intel SR9000MK4U manual Setting the Processor over the Heat Sink

6.While holding the spring clip in place on the processor, align the positioning pins on processor with the holes in the heat sink.

7.Set the processor in place over the heat sink. See the figure below.

AF001263

Figure 112. Setting the Processor over the Heat Sink

8.Use a Tork-15 screwdriver to tighten the four screws on the spring clip to secure the processor to the heat sink. Use a fastening torque of 0.45[N.m] (4.61[kgf.cm]. See the figure below.

A

AF001259

Figure 113. Securing the Processor to the Heat Sink

116 Intel® Server System SR9000MK4U Product Guide