4.Determine your next course of action and refer to the appropriate steps:
—If you have removed your front control panel / optical drive assembly and need to replace it, see “Installing the Front Control Panel and Optical Drive Assembly” on page 75.
—If you are following these steps as part of another procedure, return to that procedure.
Installing the Front Control Panel and Optical Drive Assembly
These steps assume you have removed your front control panel and optical drive assembly, your server system is currently powered down, and your front bezel is removed.
1.Slide the front control panel / optical drive assembly in through the front of the chassis as shown in the left figure below.
2.Push the assembly firmly until it clicks into place.
AF001212
Figure 72. Installing the Front Control Panel and Optical Drive Assembly
3.Determine your next course of action and refer to the appropriate steps:
—If you are following these steps as part of another procedure, return to that procedure.
—Install the front bezel. For instructions, see “Installing the Front Bezel” on page 35.
Intel® Server System SR9000MK4U Product Guide | 75 |
