Intel SR9000MK4U manual Removing a PCI Card, Opening a PCI Caution Plate

Removing a PCI Card

To perform this procedure, you will first need to remove the top cover. The steps below will direct you to the instructions to remove the top cover at the appropriate location in the step sequence.

Cautions:

•Before performing the procedures in this section, except for when hot-swapping turn off the system and then disconnect all power plugs.

•Use caution when installing the add-in card to avoid touching components on the card.

1.Remove the top cover. For instructions, see “Removing the Top Cover” on page 36.

2.Raise the PCI caution plate. See letter “A” in the figure below.

A

AF001138

Figure 57. Opening a PCI Caution Plate

Intel® Server System SR9000MK4U Product Guide 63