Intel SR9000MK4U manual Disassembling a Processor Assembly, Installing the LGA Terminal Cover

Disassembling a Processor Assembly

Before beginning this procedure, follow all steps necessary to remove the processor from the server system. For instructions, see “Removing a Processor” on page 111.

1.On the underside of the MVR, install the protective cover over on the LGA terminal.

AF001254

Figure 122. Installing the LGA Terminal Cover

2.Use a Torx-15 screwdriver to loosen the four screws on the corners of the heat sink. See letter “A” in the figure below.

3.Use a hexagonal wrench to turn the processor lock counter-clockwise to unlock the processor socket. See letter “B” in the figure.

4.Verify that the processor lock is in the unlocked position. See letter “C”.

5.Lift the processor and heat sink assembly straight up to remove it from the server.

A AA A

B

C

AF001255

Figure 123. Loosening the Heat Sink Screws

122 Intel® Server System SR9000MK4U Product Guide