Intel® Server System SR9000MK4U Product Guide 113
5. If necessary, disassemble the processor. For instructions, see “Disassembling a
Processor Assembly” on page 122.
6. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you removed the processor to replace it, see “Installing the Processor” on
page 113.
— If you are ready to re-assemble your server system, reinstall the following items,
in order:
✧The air flow guide. For instructions, see “Installing the Air Flow Guide” on
page 97.
✧The PCI card divider. For instructions, see “Installing the PCI Card Divider”
on page 93.
✧The KVM card, if necessary. For instructions, see “Installing the KVM Card”
on page 90.
✧All installed PCI cards. For instructions, see “Installing a PCI Card” on
page 59.
✧The hard drive backplane cover. For instructions, see “Installing the Hard
Drive Backplane Cover” on page 88.
✧The power supply box. For instructions, see “Installing the Power Supply
Box” on page 80.
✧All installed power supplies. For instructions, see “Installing a Power Supply”
on page 68.
✧The power supply filler panel, if necessary. For instructions, see “Removing a
Power Supply” on page 70. Follow step 4 only.
✧The top cover. For instructions, see “Installing the Top Cover” on page37.
Installing the Processor
To perform this procedure, you first need to remove the following items. If you have just
removed a processor, you have already removed these items.
•The top cover. For instructions, see “Removing the Top Cover” on page36.
•All installed power supplies. For instructions, see “Removing a Power Supply” on
page 70.
•The power supply filler panel, if one is installed. For instructions, see “Installing a
Power Supply” on page 68. Follow step 2 only.
•The power supply box. For instructions, see “Removing the Power Supply Box” on
page 76.
•Remove the hard drive backplane cover. For instructions, see “Removing the Hard
Drive Backplane Cover” on page 87.