Quadra-Fire CB1200M-MBK C. Vertical into Existing Class A Chimney, CB 1200 Pellet Stove

R

CB 1200 Pellet Stove

C. Vertical into Existing Class A Chimney

Rain Cap

Flashing	24 in. (610mm)
	minimum
Firestop
	Class A Chimney
Ceiling Support	Connector Adapter
	3 in. (76mm)
6 in.	Min.
(152mm)	Top Vent Kit
Min.
	Clean-out
Non-combustible Hearth Pad	Cover

We recommend a minimum of 60 in. (1.5m) vertical, however above the eave is preferred.

Both installations are approved for mobile home instal- lations. Must use 3 or 4 inch (76 to 102mm) “L” or “PL” Listed pellet venting or listed double wall pipe and Quadra-Fire outside air kit in mobile homes. Single wall pipe is approved for residential installations only.

Figure 15.1

D. Through The Wall & Vertical - External

	Rain Cap
Flashing	24 in. (610mm)
	Minimum

E. Vertical - Internal - Typical Installation

Rain Cap

2 in. (51mm) Minimum	Support Bracket
	every 60 in. (1524mm)
6 in. (152mm)
Minimum	Wall Thimble
	Tee
	Clean-out Cover

Flashing

Firestop

6 in.

(152mm)

Min.

24in.

(610mm)

Minimum

3 in. (76mm) Min.

3 in. to 3 in. (76-76mm) Top Vent Kit

Clean-out Cover

Non-combustible Hearth Pad

Figure 15.2

Non-combustible Hearth Pad

Figure 15.3

December 16, 2011 7014-179D Page 15